Home     ParkZone PKZ6580 VisionAire BNF with AS3X Technology
ParkZone PKZ6580 VisionAire BNF with AS3X Technology

ParkZone PKZ6580 VisionAire BNF with AS3X Technology



€ 289.95


Artikelcode: HH PKZ6580

ParkZone PKZ6580 VisionAire BNF with AS3X Technology


  • Productinformatie

Key Features
  • Spektrum™ AR635 DSMX® receiver with AS3X® System, installed
  • Powerful 10-size BL outrunner, 1250Kv, installed
  • E-flite® 40A Lite Pro Switch-Mode BEC brushless ESC (V2), installed
  • E-flite 13-gram digital micro servos, installed
  • Clear belly window for monitoring AS3X System status
  • Carbon-reinforced Z-Foam™ construction
  • Leading-edge vortex generators
  • Double-beveled hinges for large control surface throws
  • Durable wire landing gear and large wheels for flying off grass
  • Two-piece wing for easy transportation and repair
  • Sharp Mirco Pecorari signature trim scheme
  • Includes 3S 2200mAh 25C Li-Po battery
  • Includes 2- to 3-cell DC variable rate charger
  • Requires a full-range 4+ channel DSM2®/DSMX aircraft transmitter, sold separately
Needed To Complete
- A 4+ channel full-range DSM2®- or DSMX®-compatible transmitter.
Video Overview



Overview
The ParkZone® VisionAire™ park flyer is specifically designed for sport pilots by 3D pioneer Quique Somenzini. Its wings are constructed of hollow Z-Foam™ material that has been reinforced with carbon fiber to create structures that are stiffer and lighter than solid foam. This rigid, lightweight airframe is paired with a powerful 10-size, 1250Kv brushless motor that delivers the vertical performance you need for an exhilarating 3D flying experience.
What makes the VisionAire model such a great 3D plane for sport pilots is the advanced AS3X® (Artificial Stabilization – 3-aXis) System built into its AR635 receiver. The AS3X System works behind the scenes to counter the effects of wind and turbulence, using 3-axis sensing and flight control software tuned by Quique Somenzini. If you’ve never flown 3D before, this enhanced stability will give you the confidence you need to try high alpha maneuvers like harriers, hovers, torque rolls and more.
You can adjust the amount of stability the AS3X System provides or turn it off completely, but even 3D pros will find flying with it on feels completely natural. There are no delays in control response or limits on the control throws. You’ll simply feel like you’re flying an expertly-tuned model that goes right where you point it.


Specs
Wingspan:
45.0 in (1143mm)
Overall Length:
42.5 in (1088mm)
Wing Area:
539 sq in (34.8 sq dm)
Flying Weight:
43.7 oz (1240 g)
Motor Size:
10-size BL10 brushless outrunner, 1250Kv (installed)
Radio:
AR635 6-channel DSMX® AS3X® sport receiver (installed)
Servos:
(4) 13 g digital high-speed servos (installed)
Trim Scheme Colors:
Blue, red
CG (Center of Gravity):
4.5 in (115mm) back from the leading edge of wing at wing root
Wing Loading:
11.7 oz/sq. ft. (35 g/sq. dm.)
Prop Size:
12 x 4
Spinner Size:
1.57 in (40mm)
Speed Control:
40-amp Lite Pro Switch-Mode BEC brushless (installed)
Recommended Motor Battery:
11.1V 3S 2200mAh 25C Li-Po (included)
Control Throw (Ailerons):
Low: 70% up/down, 15% expo; High: 100% up/down, 25% expo
Control Throw (Elevator):
Low: 70% up/down, 15% expo; High: 100% up/down, 20% expo
Control Throw (Rudder):
Low: 70% right/left, 10% expo; High: 100% right/left, 15% expo
Approx. Flying Duration:
6 minutes
Charger:
2-3 cell DC Li-Po balancing charger
Main Wing Tube Length:
350mm
Main Wing Tube OD:
16mm
Tail Wing Tube Length:
280mm
Tail Wing Tube OD:
8mm
Is Assembly Required:
Yes
Assembly Time:
Less than 1 Hour
Plane Type:
Aerobatic & 3D
Experience Level:
Intermediate
Power Plant Size:
10-15 Electric
Recommended Environment:
Outdoor
Fuel Type:
Electric